Philips iPlayer 3 - Introduction to iPlayer 3 Modes

iPlayer 3 Product Guide10
Conguration Menus
You can change the following options via Configuration mode:
Triggers Menu
Triggers enable you to assign shows to the Preset buttons on the iPlayer 3,
the keypad buttons on the Controller Keypad, or the contact switches connected
to an AuxBox. Triggers also specify playback behaviors such as repeat or jump to
another show.
Alarms Menu
Alarms enable you to automate show playback by specific time, date, day of the week
or astronomical event.
Setup Menu
The setup menu provides access to port configuration, clock setup, LCD setup,
and more.
Info Menu
The info menu displays the device firmware version, memory usage, and more.
At any time during playback, press to launch Configuration mode and open the
Main Menu. From the Main Menu, press and to scroll through menu options
and to access a submenu. To save your changes, continue pressing until you reach
the Save Changes menu item, then press a final time to save. Press at any time
to cancel the menu action and return to playback mode.
Example: Changing the Pre-congured Show Assigned to Preset Button 2
1. Launch Conguration mode, access the Triggers submenu, and then select menu
option 2.
2. Access the Show Type submenu, then select Canned Effect to open the pre-
congured show types.
3. Access the Effect Type submenu, then pick Cross Fade, which produces a smooth
transition from one solid color to another.
4. Navigate through the effect-specic submenus, specifying properties for start
color, end color, hold time duration, fade time duration, and offset (angle).
5. At the Test Ef fect submenu, preview your show, then press to continue.
6. Select show Transition type Snap (no transition).
7. Press to save your changes.
09:23:03 15-DEC-09
Config mode
Trigger number? <
1
09:23:22 15-DEC-09
Config mode
Alarm days? <
Specific month/day
09:23:39 15-DEC-09
Config mode
Setup menu <
Set date & time
09:23:52 15-DEC-09
Config mode
memory usage <
232k/246760k