Philips L Series - Cabinet Alignment Step 3; Screw Tightening Step 4

41BDL7324L
7
Step 3
.
Align the cabinet with the connecting plate and secure the cabinet to the holes on the connecting plate
.
Rotate the hex key
clockwise until the screw bolts are inserted. Do not over tighten the screw bolts yet as you may need to adjust the connecting
plates again.
Step 4
.
Tighten the screw bolts (
1
). Move up to install the next row. Install the connecting plates on the bracket. Rotate the hex
key clockwise until the screw bolts are inserted (
2
). Do not tighten the screw bolts yet, as this will cause unevenness of the
connecting plates.
1
2