8 Quick reference guide
2.3.2 Set the date and time
After selecting the user interface language, the Digital Pocket Memo will prompt you to set the
current date and time.
Press the + or - button (5) repeatedly to change the value for the year, month or day.
2 Press the → smart button (2b) to advance the arrow (↑) to the next entry.
3 After setting the day, press the → smart button to advance the settings to the correct time.
4 Press the + or - button to select 2-hour or 24-hour notation, AM or PM (if 2-hour notation
is selected) and to change the value hour and minute settings.
5 Press the → smart button to confirm that the date and time is correct. The Digital Pocket
Memo is now ready to function.
D Note: If a mistake is made in the date/time settings, use the ← smart button (2a) anytime
during the procedure to step back to make corrections. It is also possible to change the
date and time later using the menu. See Digital Pocket Memo menu on page 13 for more
information.
9600_qrg_20070108.indb 8 22/02/2007 14:32:46
To Next Page
Loading...
