1
2
D Note
It is possible to change the language later using
the menu. See Menu settings on page 18 for
more information.
3.6.2 Set the date and time
After selecting the user interface language, the
Digital Pocket Memo will prompt you to set the
current date and time.
Press the 1 + or – button
1
repeatedly to
change the value for the year, month or day.
Press the 2 → smart button
2
to advance the
arrow (↑) to the next entry.
After setting the day, press the 3 → smart
button
2
to advance the settings to the
correct time.
Press the 4 + or – button
1
to select a
2-hour or 24-hour clock, AM or PM (if a
2-hour clock is selected), and to change
the value of the hour and minute settings.
Press the 5 → smart button
2
to confirm the
date and time. The Digital Pocket Memo is
now ready to function.
1
2
3
D Note
If a mistake is made in the date/time settings,
use the ← smart button
3
any time during the
procedure to step back to make corrections.
It is also possible to change the date and time
later using the menu. See Menu settings on page
18 for more information.
Power-save mode3.7
After four minutes of inactivity, the Digital
Pocket Memo automatically goes into power-
save mode and the LCD screen will display the
date and time. Press any button to reactivate it.
If the Digital Pocket Memo is not used for more
than two hours, it turns o completely. Turn the
unit on by moving the On/O switch to the OFF
position and then back to the ON position.
To Next Page
Loading...
