Press the 4 REC button
3
and start speaking.
The status LED
4
glows in red (in
overwrite mode) or green (in insert mode)
while recording.
The following information is displayed:
a
Recording mode
b
Recording position (minutes : seconds)
c
Current position in the recording
d
File number
e
File name
For short pauses, press the 5
REC button.
3
The status LED flashes.
4
To continue recording, press the
REC button
again.
3
To stop recording, press the 6 STOP smart
button.
5
c
d
e
a
3
5
6
b
4
E Tip
For best results, speak clearly and keep
the microphone
6
about four inches (ten
centimeters) away from your mouth.
Using your Digital Pocket 4
Memo
Record4.1
Create a new recording4.1.1
Follow these steps to create a recording with
the Digital Pocket Memo:
A memory card must be inserted into 1
the memory card slot. See Insert and
eject the memory card on page 8 for more
information.
Slide the On/O switch to the 2
ON position
to switch on the Digital Pocket Memo.
1
Press the 3 NEW smart button
2
to create a
new recording.
D Note
The
NEW smart button is not displayed if
the current recording is empty.
To Next Page
Loading...
