formatting process was cancelled, insert another
card that can be formatted or has already been
formatted.
D Note
Formatting is not possible if the memory card is
in read-only mode (locked).
Activate the Digital Pocket Memo3.6
The Digital Pocket Memo is turned on and o
by sliding the
ON/OFF switch. When using it for
the first time, you will be prompted to set the
language, date and time.
3.6.1 Set the language
When using the Digital Pocket Memo for the
first time, you will be prompted to set the
language.
Press the 1 + or – button
1
on the Digital
Pocket Memo to select a language.
Press the 2
OK smart button
2
to confirm
your selection. The selected language will be
displayed.
D Note
If the Digital Pocket Memo is turned to the
ON
position and there is no memory card inserted,
a warning screen is displayed.
The memory card that is packaged with the
Digital Pocket Memo is already formatted and
ready for use. If a memory card is inserted that
is not formatted, the Digital Pocket Memo will
oer the option to format it. Refer to the next
chapter for more information.
3.5 Format a new memory card
When a new, unformatted memory card (or a
memory card that was formatted with a non-
Digital Pocket Memo device) is inserted, the
Digital Pocket Memo will display a prompt to
format the memory card. To confirm and start
the formatting process, press the
OK smart
button
1
. To cancel the formatting process,
remove the memory card or press the
CANCEL
smart button
2
.
To Next Page
Loading...
