18
English
7 Try each setting on your skin if comfortable:
-
When the 'READY to flash' light is white, press the flash button on the
handle once, to treat one spot with setting ➀
The device makes a soft popping sound. The flash gives you a warm
sensation.
• You will see a flash of light •
Note: You can toggle through the light intensity settings by pressing the
toggle button.
-
Move to next area. Treat one spot with setting ➁
-
Move to next area. Treat one spot with setting ➂
-
Move to next area. Treat one spot with setting ➃
-
Move to next area. Treat one spot with setting ➄
8 Wait 24 hours.
9 Check your skin. The highest setting that...
-
still felt comfortable and
-
did not show a skin reaction (e.g. redness, irritation, rash)
... is the setting to start the treatment with.
To Next Page
Loading...
