Philips MCM2300 Short User Manual

Short user manual
www.philips.com/welcome
Always there to help you
Register your product and get support at
Question?
Contact
Philips
Question?
Contact
Philips
Question?
Contact
Philips
MCM2300
Short User Manual
Befor e using your pr oduct, r ead all accompanying safety
infor mation.
Specications are subject to change without notice.
2014 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used by WOOX Innovations Limited
under license from Koninklijke Philips N.V.
MCM2300_79_Short User Manual_V1.0
In standby mode: ON Standby mode
In Eco power standby mode: ON
Eco power standby mode
ON Eco power standby mode
Standby mode
Note: After this product stays inactive for 15
minutes, it automatically switches to the
normal standby mode.
After this product stays in the normal
standby mode for 15 minutes, it
automatically switches to the eco power
standby mode.
1 In standby mode, press and hold CLOCK for more than 2
seconds.
2 Press / to select 24H or 12H hour format, and then
press CLOCK.
3 Press / to set the hour, and then press CLOCK.
4 Press / to set the minute, and then press CLOCK.
Note: If no button is pressed in 90 seconds during setting,
MCM2300 exits clock setting without saving earlier operations.
Note: Make sure that you have set the clock correctly.
If the selected alarm source is unavailable, this product switches to
FM mode automatically.
1 In standby mode, press and hold SLEEP/TIMER for 2 seconds.
2 Press / repeatedly to set the hour, and then press
SLEEP/TIMER to conrm.
3 Press / to set the minute, and then press SLEEP/TIMER
to conrm.
4 Press / to select an alarm source (DISC, USB or Tuner),
and then press SLEEP/TIMER to conrm.
5 Press / to set the alarm volume, and then press
SLEEP/TIMER to conrm.
To stop the alarm, press SLEEP/TIMER.
To deactivate the alarm timer, press SLEEP/TIMER until
disappears.
CD
USB
Start, pause, or resume play.
Stop play.
/
Select an album or a folder.
/
Press to skip to the previous or next track.
Press and hold to search backward/forward
within a track.
REPEAT
Play a track or all tracks repeatedly.
SHUFFLE
Play tracks randomly.
VOL +/-
Increase or decrease the volume.
MUTE
Mute or restore sound.
SOUND
Select a preset sound equalizer.
DISPLAY
Adjust display brightness.
Program tracks
This function allows you to program 20 tracks in the desired
sequence.
1 In DISC or USB mode, press to stop play.
2 Press PROG to activate the program mode.
3 Press / to select a track.
•For MP3 tracks, press / to select an album r st, and
then press
/ to select a track.
4 Press PROG to conrm.
•Repeat steps 3 to 4 to program more tracks.
5 Press to play the programmed tracks.
To erase the program
Press
twice.
User Manual
www.philips.com/welcome
Always there to help you
Register your product and get support at
Question?
Contact
Philips
To download t he full user manual, visit
www.philips.com/support.

Philips MCM2300 Specifications

Sound Specifications

maximum output power (RMS)	15W
sound enhancement	digital sound control
speaker drivers	3" woofer

Connectivity and Power

USB port	USB host
audio in	3.5mm
power supply	100-240VAC, 50/60Hz

Weight and Dimensions

main unit width	180 mm
main unit height	121 mm
main unit depth	247 mm
main speaker dimensions (W x D)	150 x 125 mm
main speaker height	238 mm
packaging width	577 mm
packaging height	312 mm
packaging depth	185 mm
gross weight	4.5 kg
net weight	3.55 kg