EasyManua.ls Logo

Philips MCP9350i - Page 20

Philips MCP9350i
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
The Welcome screen of Media Center setup wizard is dis-
played.
1 Click Next.
> Media Center Setup required and optional setup informa-
tion is displayed.
2 Click Next.
> Media Center Privacy Policy information is displayed.
3 Click Next.
> Enhanced Playback screen is displayed.
4 Follow the on-screen instructions, make your selection
and click Next.
> Join Wireless Network screen is displayed.
5 For connection of your Media Center to a wireless net-
work select Yes and click Next.
• Select ‘Enter my network name manually’ and
click Next.
• Select your network name in the list and click Next.
• Select Finish to exit.
OR:
If your network name is not listed:
• Select Not listed’ and click Next.
• Enter your network name and click Next.
• If your network is protected, select Yes and click
Next.
• Enter your network key (WEP or WPA) and click
Next.
Note:The encryption key is case sensitive, meaning that ‘ABC’ is
not the same as ‘aBC’.
6 If you have a permanent connection to the Internet
(‘always on’ DSL or cable connection) selectYe s and
click Next.
7 Click Test to test your Internet connection.
If your connection is not working, check:
- connectors and cables;
- check your router settings;
- contact your Internet service provider.
Optional setup
In the optional setup procedure you can customize your Media Center.The setup wizard enables you to:
– configure tuners,TV signal, and TV program guide information;
– select and adjust Media Center display settings;
– setup of speakers;
– control of your set-top box.
Media center installation with a Sky set-top box
Configure Tuners,TV Signal and Guide
1 Confirm Your Region
• Check Current Region is correct and follow on-screen instructions
2 Automatic TV Signal Setup
• Select I will manually configure my TV signal
3 • Select Your TV Signal
• If you are using a set-top box, select Satellite
4 • Select Your TV Signal Type
• Select Analog Terrestrial (PAL/SECAM)
5 Which Tuners Do You Want to Configure?
If you are using one set-top box please tick check NVIDIA DualTV Tuner’ only
If you wish to connect two set-top boxes to your Showline PC Media Center also tick check NVIDIA DualTV Tuner 2
QIG_MCP9350i_Eng_UK.qxd 01-11-2005 09:21 Pagina 20

Other manuals for Philips MCP9350i

Related product manuals