Philips MCP9350i - Page 53

Hardware Repair
MCP9350i 12. EN 53
12.12.3. FP I/O Board Replacement
1.
Remove the FP I/O board subassembly. See paragraph 12.12.1.
2. Remove the 3 mounting screws (4) from the FP I/O board. See Figure 12.12-4.
3. Remove the FP I/O board from the FP I/O board cage.
Figure 12.12-4
12.12.4. FP I/O Board Re-Assembly
To re-assemble the FP I/O board, do all processes described in paragraph 12.12.3 in reverse order.
Note:
The torque setting required for the FP I/O board mounting screws (4) is 6kg-cm
4
4
4