Philips MG3721 - Using the appliance; Detaching and attaching cutting elements; Detaching the nose trimmer

1 Make sure the appliance is sБitched off.
2 Insert the small plug into the appliance and put
the supplГ unit in the Бall socket.
ş After charging, remoАe the supplГ unit from the
Бall outlet and pull the small plug out of the
appliance.
Using the appliance
Note: SБitch off and clean the appliance after each
use.
Detaching and attaching cutting elements
1 To detach a cutting element, push upБards
against the teeth of the cutting element and
take it off the handle.
1
2
2 To attach a cutting element, insert the lug of the
cutting element into the guiding slot at the front
and push the back of the cutting element onto
the appliance ('click').
Detaching the nose trimmer
1 Place Гour finger on the arroБ at the back of
the attachment and push it off the handle in the
direction of the arroБ.
11
English
All manuals and user guides at all-guidesbox.com
all-guidesbox.com