10
2. Setting up the monitor
4
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
3840 × 2160. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use
3840 × 2160 for best results.
Display of the native resolution alert
can be switched off from Setup in the
OSD (On Screen Display) menu.
5
Physical Function
Tilt
20
-5
Swivel
+35
-35
Height adjustment
130mm
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
To Next Page
Loading...
