Cleaning the shaver
Clean the shaver after every shave for optimal
shaving performance.
Always check if the water is too hot, to
prevent burning your hands.
While rinsing shaving heads, water may drip
out of the base of shaver. This is a normal
occurrence. Internal electric parts are in a
waterproof compartment so the shaver will
be protected against water damage.
1 Turn off the shaver, unplug from outlet and
remove power cord from the product.
2 Press the unit release button to open the
shaving unit.
3 Rinse the shaving unit and hair chamber
with lukewarm water.
4 Rinse the outside of the shaving unit with
lukewarm water.
12
English
To Next Page
Loading...
