-
Always check cutters, cutting unit and
guards before using the product. Do not use
the product if cutters, cutting unit or guards
are damaged, as injury may occur.
-
Always attach power cord to product or
charging stand first, then to power outlet.
To disconnect, set all controls to 'off'
position. Then remove power cord from
power outlet.
-
Unplug power cord before plugging in or
unplugging the product.
-
Only use the power cord and other
accessories supplied with the product.
-
Do not attempt to open the product to
remove or replace the built-in rechargeable
battery.
-
The batteries used in this product may
present a fire or chemical burn hazard if
mistreated. Do not disassemble, heat above
100°C (212°F) or incinerate.
IMPORTANT: The power plug contains a
transformer. Do not cut off the power plug to
replace it with another plug as this will cause a
hazardous condition.
SAVE THESE
INSTRUCTIONS
Contents
IMPORTANT SAFETY INSTRUCTIONS___ 6
General description (Fig. 1)_______________ 9
8
English
To Next Page
Loading...
