46
English
3 Turn the retaining rings counterclockwise
and remove them. Place them aside in a
safe place.
4 Remove the shaving heads from the
shaving head holder.
Discard the used shaving heads
immediately to avoid mixing them with the
new shaving heads.
5 Place new shaving heads in the holder.
6 Place the retaining rings back onto the
shaving heads and turn them clockwise to
reattach the retaining ring.
-
Each retaining ring has two recesses that fit
exactly into the projections of the shaving
head holder. Turn the ring clockwise until
your hear a click to indicate that the ring is
fixed.
To Next Page
Loading...
