Philips Norelco S9721 - Recharging and Quick Charge; Recharging the Battery; Quick Charge Functionality; Shaving and Conversion Process

1
2
2 Put the small plug in the shaver and
connect the power plug to any 100V to
240V AC outlet. Use only the power cord
provided.
The display of the shaver indicates that the
shaver is charging.
3 After charging, remove the power plug from
the power outlet and pull the small plug out
of the shaver.
Charging in the SmartClean system (specific types
only)
1 Put the small plug in the back of the
SmartClean system.
2 Put the power plug in the wall socket.
3 Press to open the SmartClean system cap,
to be able to place the shaver in the holder
('click').
4 Hold the shaver upside down above the
holder. Make sure the front of the shaver
points towards the SmartClean system
holder.
1
2
3
5 Place the shaver in the holder, tilt the
shaver backwards and press down the
SmartClean system cap to connect the
shaver (‘click’).
Note: The battery symbol starts to flash to
indicate that theappliance is charging. When
15
English