Philips Norelco S9721 - Page 24

Preparing the SmartClean system for use
Caution: Do not tilt the SmartClean system to
prevent leakage.
Note: Hold the SmartClean system while you
prepare it for use.
Note: If you clean the shaver in the SmartClean
system once a week, the SmartClean cartridge
lasts approximately three months.
1 Put the small plug in the back of the
SmartClean system.
2 Put the power plug in the wall outlet.
2
1
3 Press the button on the side of the
SmartClean system (1) and lift the top part
of the SmartClean system (2).
4 Pull the seal off the cleaning cartridge.
5 Place the cleaning cartridge in the
SmartClean system.
24
English