1 Attach the attachment to the product
('click').
2 Slide the comb straight into the guiding
grooves on both sides of the beard styler
attachment (‘click’).
3 Press the length selector and then push it
to the left or right to select the desired hair
length setting.
4 Switch on the product.
5 Move the product upwards while you exert
gentle pressure. Make sure the front of the
comb is in full contact with the skin.
6 Clean the attachment after use.
Using the beard styler attachment without
comb
You can use the beard styler attachment
without the comb to contour your beard,
moustache, sideburns or neckline to a length
of 0.5mm (1/32 in).
1 Pull the comb off the beard styler
attachment.
19
English
To Next Page
Loading...
