26
English
take several weeks before optimal shaving
performance is restored.
5 Clean the cutter and guard under the tap.
6 Shake off excess water.
7 Put the shaving heads back into the shaving
head holder. For detailed instructions, see
'How do I replace the shaving heads?'.
8 Insert the hinge of the shaving head holder
into the slot in the top of the shaving unit
and close the shaving unit.
Cleaning the pop-up trimmer
Clean the trimmer after each use to prevent
clogging and damage.
Never dry the trimmer teeth with a towel or
tissue, as this may damage the trimmer teeth.
1 Make sure that the product is switched off
and disconnected from the power outlet.
2 Push the trimmer release slide down to
open the pop-up trimmer.
3 Switch on the product and rinse the pop-up
trimmer with warm water.
4 After cleaning, switch off the product.
5 Carefully shake off excess water and let the
pop-up trimmer air-dry.
6 Close the trimmer.
To Next Page
Loading...
