ENGLISH
C 6 Place the retaining ring holder on the
retaining ring (1), place it on the shaving
head (2) and turn clockwise (3) to reattach
the retaining ring.
7 Repeat this process for the other retaining
rings.
C 8 Hold the shaving head holder in your hand
and place the retaining ring on the shaving
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
C 9 To reset the shaver, press and hold the On/
Off button for approximately 7 seconds.
You will hear 2 beeps.
This shaver/SmartClean System has no other
user-serviceable parts. For assistance call 1-800-
243-3050.
Replacing the SmartClean System
Cleaning Cartridge
C ◗ For optimal cleaning results, replace the
cleaning cartridge when the replacement
indicator blinks orange or every 3 months.
34
7 sec.
1
3
2
1
2
To Next Page
Loading...
