24
Trimming ear hair
Make sure your outer ear channels are clean and
free from wax.
1 To switch on the appliance, turn the battery
compartment cover from the ‘off’ position (0)
to the ‘on’ position (I) (Fig. 8) .
2 Slowly move the trimming head along the
rim of the ear to remove hairs that stick out
beyond the rim.
3 Insert the trimming head into the outer ear
channel.
Do not insert the trimming head more than
0.5cm into your ear channel, as this could damage
the eardrum.
4 Slowly turn the trimming head around to
remove all unwanted hairs from your outer
ear channel (Fig. 11) .
5 To switch off the appliance, turn the battery
compartment cover to the ‘off’ indication
(0) (Fig. 10) .
ENGLISH
To Next Page