Philips PET941D - Page 3

1.0 TECHNICAL SPECIFICATION
Factory Service Mode (FSM)
Procedure to change region code of your DVD
Portable
1. Power ON the DVD player and do not insert
DISC inside player
2. SetupPrefer
Press IR in the sequence as
9653
The LCD display showed the existing region
Code.
3. Press (navigation up) or (navigation
down) repeatedly to select the number from 0
to 6.
4. Then press OK to confirm your region code.
5. Refer below table for your region code setting
Select “0” setting = Region Free (confidential)
Procedure for SW upgrade
1. Please burn the PHILIPS.BIN file into a empty
Disc
.
2. Power on PET941D with AC/DC adapter.
3. Insert the upgrade disc and PLAY.
4. The set will detect the upgraded SW.
5. Press “OK” to confirm and proceed.
6. The set will reset once finished upgrade.
Warning: Do not unplug the AC adapter
during firmware upgrade to prevent flash
corrupt of the set!!
Procedure to check SW version of your DVD
Portable
1. SetupGeneral
Press IR in the sequence as
3308
Then a menu will be show XX-YY-MM-DD