Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
© 2007 Koninklijke Philips Electronics N.V.
All rights reserved.
Specifi cations are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
1
2
3
Connect
Install
Enjoy
PhotoViewer
SPV3000
Quick start guide
What’s in the box
1x
2x
What you also need
TV (LCD or other)
Quick start guide User manual Product sticker (1x)
Stand stickers (2x)
Stand Power adapter Component video cable
Audio & compo site video cable
Remote control
Troubleshooting
Problem Tip
I don’t see the user • Set the TV to the correct programme number
interface of the (for example, EXT, 0, AV).
PhotoViewer on the TV. See the documentation that came with your TV.
There is no sound signal • Check if the audio cables are connected correctly.
from the TV or audio • Check if the volume of your TV or audio system is turned on.
system. • Make sure that the fi le format of your audio fi les is MP3 and
that the fi les do not have copy protection.
The PhotoViewer does • When you press a button on the remote control, point the
not react when I press remote control in the direction of the power switch of the
a button on the remote PhotoViewer.
control. • Replace the battery of the remote control.
The picture seems to be • Change the resolution with the resolution button on the
transformed. remote control.
• Change the settings of the connected TV.
See the documentation that came with your TV.
The connected printer • Make sure that the printer is switched on.
does not react. • Make sure that the printer is connected to the USB port at
the back of the PhotoViewer.
• Change the settings of the connected printer. See the
documentation that came with your printer.
• Make sure that the printer supports the ESC/P-R protocol.
See the website www.philips.com/support for more questions and answers.
To Next Page
Need help?
Connectivity
Video
Power
