Philips PM 6672 - Page 6

Accessories
Supplied with the Instrument:
• Line power cord
• Fuse, 1.6A fast-blow
• Front cover
• l\/lanual
To be ordered separately:
PM 9678: TCXO, 1 XlO-'/montti,
Included in version /02.
PM 9679: Proportionally oven controlled
oscillator 1 xiO'Vmonth.
Included in version /03.
PM 9690: Proportionally oven controlled
oscillator 1.5XlO-724h.
Included in version /04.
PM 9691: Proportionally oven controlled
oscillator 5 xi0''°/24h.
Included in version /05.
PM 9693: Battery unit.
PM 9694: BCD output and display offset unit.
PM 9695: Analog recorder output (DAG).
PM9696: IEC625/IEEE488 BUS interface.
PM 9483/50: lEEE-to-lEC adapter.
PM 9487/10: IEEE cable, 1 m.
PM 9487/20: IEEE cable, 2m.
PM 9487/40: IEEE cable, 4 m.
PM 9697: External reference frequency
multiplier.
PM 8923: 120MHz, 1Mohm probe set,
1:1 and 1:10.
PM8943: 650 MHz, 50ohm/1 Mohm FET
probe set, 1:1-10-100.
PM 9639: 1.5GHz, 500ohm probe set 1:10.
PM 9581: 50ohm feed-through termination,
1W.
PM 9585: 50ohm feed-through termination,
3W.
PM 9074: Coaxial cable. 50ohm, BNC to
BNC, 1m.
PM 9588: Set of 15 coaxial cables, 50ohm,
BNC to BNC.
5 cables (20.7 cm), 4 cables (40.5 cm),
3 cables (60.3 cm), 3 cables (198.6 cm).
PM 9669/01: 19" rack mount adapter to fit
one instrument.
PM 9669/02: 19" rack mount adapter to fit
two instruments,
PM 9672: Carrying case.
NOTE: The timebase oscillators, PM 9678,
-79, -90 and -91, can also be ordered sepa
rately for later upgrading of the counters.
The counters can not simultaneously be
equipped with more than one of the follovi/-
ing options: PM 9693, PM 9694, PM 9695
and PM 9696. The multiplier PM 9697 can
only be instal led simultaneously with the
.'01 osci llator. In 702, . ,705 versions the
osci llator must be removed before a
PM 9697 can be plugged in.