33Barcode scanner configuration guide
Enable/Disable Code 39 Full ASCII
Parameter # 11h
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or disable Code 39 Full ASCII, scan
the appropriate bar code below.
4 - 40 SE655 Decoded Linear Imaging Engine
Enable/Disable Code 39 Full ASCII
Parameter # 11h
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or
disable Code 39 Full ASCII, scan the appropriate bar code below.
Enable Code 39 Full ASCII
(00h)
*Disable Code 39 Full ASCII
(00h)
NOTE Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. If the Enable Trioptic Code
39 setting is not accepted*, disable Code 39 Full ASCII and try again.
*An SSI parameter entry error, event ID 07h, is sent to the host if packeted data communication is
enabled to inform the user that the parameter change was not accepted.
NOTE: Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. If the Enable Trioptic Code 39 setting is not accepted*, disable
Code 39 Full ASCII and try again.
*An SSI parameter entry error, event ID 07h, is sent to the host if packeted data communication is enabled to inform the user that the parameter
change was not accepted.
To Next Page
Loading...
