Philips Pocket Memo DPM8500 - Code 11 Check Digit Verification; Transmit Code 11 Check Digits

38 Barcode scanner configuration guide
Code 11 Check Digit Verification
Parameter # 34h
This feature allows the scan engine to check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit
algorithm. This selects the check digit mechanism for the decoded Code 11 bar code. The options are to check for one check digit, check for two
check digits, or disable the feature.
To enable this feature, scan the bar code below corresponding to the number of check digits encoded in your Code 11 symbols.
Parameter Menus 4 - 45
Code 11 Check Digit Verification
Parameter # 34h
This feature allows the scan engine to check the integrity of all Code 11 symbols to verify that the data complies with the
specified check digit algorithm. This selects the check digit mechanism for the decoded Code 11 bar code. The options are
to check for one check digit, check for two check digits, or disable the feature.
To enable this feature, scan the bar code below corresponding to the number of check digits encoded in your Code 11
symbols.
*Disable
(00h)
One Check Digit
(01h)
Two Check Digits
(02h)
Transmit Code 11 Check Digits
Parameter # 2Fh
This feature selects whether or not to transmit the Code 11 check digit(s).
4 - 46 SE655 Decoded Linear Imaging Engine
Transmit Code 11 Check Digits
Parameter # 2Fh
This feature selects whether or not to transmit the Code 11 check digit(s).
Transmit Code 11 Check Digit(s) (Enable)
(01h)
*Do Not Transmit Code 11 Check Digit(s) (Disable)
(00h)
NOTE Code 11 Check Digit Verification must be enabled for this parameter to function.
NOTE: Code 11 Check Digit Verification must be enabled for this parameter to function.