Philips Pocket Memo DPM8500 - Convert I 2 of 5 to EAN-13

41Barcode scanner configuration guide
Transmit I 2 of 5 Check Digit
Parameter # 2Ch
Scan this symbol to transmit the check digit with the data.
Parameter Menus 4 - 49
I 2 of 5 Check Digit Verification
Parameter # 31h
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with a specified algorithm,
either USS (Uniform Symbology Specification), or OPCC (Optical Product Code Council).
*Disable
(00h)
USS Check Digit
(01h)
OPCC Check Digit
(02h)
Transmit I 2 of 5 Check Digit
Parameter # 2Ch
Scan this symbol to transmit the check digit with the data.
Transmit I 2 of 5 Check Digit (Enable)
(01h)
Scan this symbol to transmit data without the check digit.
*Do Not Transmit I 2 of 5 Check Digit (Disable)
(00h)
Scan this symbol to transmit data without the check digit.
Parameter Menus 4 - 49
I 2 of 5 Check Digit Verification
Parameter # 31h
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with a specified algorithm,
either USS (Uniform Symbology Specification), or OPCC (Optical Product Code Council).
*Disable
(00h)
USS Check Digit
(01h)
OPCC Check Digit
(02h)
Transmit I 2 of 5 Check Digit
Parameter # 2Ch
Scan this symbol to transmit the check digit with the data.
Transmit I 2 of 5 Check Digit (Enable)
(01h)
Scan this symbol to transmit data without the check digit.
*Do Not Transmit I 2 of 5 Check Digit (Disable)
(00h)
Convert I 2 of 5 to EAN-13
Parameter # 52h
This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. To accomplish this, I 2 of 5 must be enabled,
one length must be set to 14, and the code must have a leading zero and a valid EAN-13 check digit.
4 - 50 SE655 Decoded Linear Imaging Engine
Convert I 2 of 5 to EAN-13
Parameter # 52h
This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. To accomplish this,
I 2 of 5 must be enabled, one length must be set to 14, and the code must have a leading zero and a valid EAN-13 check
digit.
Convert I 2 of 5 to EAN-13 (Enable)
(01h)
*Do Not Convert I 2 of 5 to EAN-13 (Disable)
(00h)