Philips Pocket Memo DPM8500 - CLSI Editing; NOTIS Editing

50 Barcode scanner configuration guide
Parameter Menus 4 - 59
Codabar (continued)
Codabar - Two Discrete Lengths
Length Within Range - Select this option to decode a code within a specified range. For example, to decode Codabar
symbols containing between 4 and 12 characters, first scan Codabar Length Within Range, then scan 0, 4, 1 and 2
(single digit numbers must always be preceded by a leading zero). Numeric bar codes begin on page 4-73. To change the
selection or cancel an incorrect entry, scan Cancel on page 4-74.
Codabar - Length Within Range
Any Length - Scan this option to decode Codabar symbols containing any number of characters.
Codabar - Any Length
CLSI Editing
Parameter # 36h
When enabled, this parameter strips the start and stop characters and inserts a space after the first, fifth, and tenth characters of a 14-character
Codabar symbol.
NOTE: Symbol length does not include start and stop characters.
4 - 60 SE655 Decoded Linear Imaging Engine
CLSI Editing
Parameter # 36h
When enabled, this parameter strips the start and stop characters and inserts a space after the first, fifth, and tenth
characters of a 14-character Codabar symbol.
Enable CLSI Editing
(01h)
*Disable CLSI Editing
(00h)
NOTIS Editing
Parameter # 37h
When enabled, this parameter strips the start and stop characters from decoded Codabar symbol.
Enable NOTIS Editing
(01h)
*Disable NOTIS Editing
(00h)
NOTE Symbol length does not include start and stop characters.
NOTIS Editing
Parameter # 37h
When enabled, this parameter strips the start and stop characters from decoded Codabar symbol.
4 - 60 SE655 Decoded Linear Imaging Engine
CLSI Editing
Parameter # 36h
When enabled, this parameter strips the start and stop characters and inserts a space after the first, fifth, and tenth
characters of a 14-character Codabar symbol.
Enable CLSI Editing
(01h)
*Disable CLSI Editing
(00h)
NOTIS Editing
Parameter # 37h
When enabled, this parameter strips the start and stop characters from decoded Codabar symbol.
Enable NOTIS Editing
(01h)
*Disable NOTIS Editing
(00h)
NOTE Symbol length does not include start and stop characters.