13 m / 42.5 ft.
2 m / 6.5 ft.
6 m / 20 ft.
7 m / 23 ft.
2 m / 6.5 ft.
Install the recorder
Note
• Charge the battery for 3 hours before first use.
The battery is pre-installed in the recorder. Pull the battery tape
o from the battery door before charging.
Insert and eject the memory card
The devices operates with a SD/SDHC memory card and sup-
ports cards with storage capacities of up to 32 GB. The device
operates with a SD/SDHC memory card and supports cards
with storage capacities of up to 32 GB. Your recorder is packaged
with a memory card already inserted and formatted.
To insert and eject a memory card:
1
Locate the memory card slot on the top of the recorder.
2
Insert a memory card with the gold-colored contacts facing
down (toward front of the device).
3
Push the memory card in the memory card slot until it locks
in place.
4
To remove the card press the memory card slightly until the
snapping mechanism unlocks and the card is ejected.
To Next Page
Loading...
