Philips Professional HFL5114/12 Series - Network Control TV Over IP

- 61 -
The yellow RJ48 Serial Xpress connector on the back
side of TV is not the network connector
o
[
WPS with PIN code
]: Connect your TV
wireless to the network using WPS with
PIN code
o
Navigate to the [
Show Network Lost
Message] menu
o You will see below items:
o [No]: Disable to show a message when
the network connection is lost
o [Yes]: Enable to show a message when
the network connection is lost
6.12.3 Network Control TV Over IP
o
Navigate to the [
Wireless and Networks
]
[Control TV Over IP] menu
o You will see the screen on the left
o
Navigate to the
[
Wireless and Networks
]
[Control TV Over IP] [Webservices] menu
o Web Services is a mechanism to exchange
information from the TV to the server. The TV
will send below services to the server on a
periodically
o You will see below items:
o [Server URL]: This is the URL where the
Web Services server can be found. This
server will host the pages
By default, this URL is:
http://SmartInstall.org:8080/webservices
.jsp
To get your TV’s detected in CMND you
need to change ‘SmartInstall.org’ to the IP
address of your CMND server. For
example:
http://1.2.3.4:8080/webservices.jsp
o [TVDiscoveryService]: TV Discovery
Service is the Web Service through which