Philips Professional HFL5114U/12 Series - Date and Time

- 55 -
Note:
Above menus are only
available
when [EasyLink] is set to [On]
o
Navigate to the [
HDMI Ultra HD
] menu
Note: This menu is only available for the
xxHFL6014
o You will see below items:
o [HDMI1 & 2]: Select [Optimal] to
enable the highest quality HDMI
signal for 4K Ultra HD (4K60 4:4:4),
select [Standard] or [Off] if picture or
sound are distorted
o [HDMI 3]: select [Standard] or [Off] if
picture or sound are distorted
Note: [Standard] enables up to 2160p60
4:2:0, [Optimal] enables up to 2160p60
4:4:4 and [Off] enables up to 1080p60.
The list of sources is depending on the
hardware in relation to the screen size
and can be different from the screenshot
6.11 Date and Time
o
Navigate to the [
Date and Time
] menu
o You will see the screen on the left
o
Navigate to the
[
Source
] menu
o You will see below items:
o [Automatic NTP/Channels]: When
selected, the clock extraction is
performed from a NTP Server or Live
Channels (RF & IP). The NTP has higher
priority than Channels
o [Automatic Channels]: Date and time
is received via channels data (can be
both RF or IP depending on the
installed channels)