3 Press the release button to open the shaving
unit.
4 Pull the shaving unit off the shaver.
5 Turn the lock anticlockwise (A) and remove
the retaining frame (B).
6 Remove the shaving heads and place new ones
in the shaving unit.
Note: Make sure that the projections of the shaving
heads t exactly into the recesses.
7 Put the retaining frame back into the shaving
unit (A) and turn the lock clockwise (B).
8 Insert the lug of the new shaving unit into the
slot in the top of the shaver. Then close the
shaving unit.
Note: If the shaving unit does not close smoothly, check
if you have inserted the shaving heads properly and if
the retaining frame is locked.
ENGLISH16
To Next Page
Loading...
