Charging
- When the shaver is charging, the charging light flashes green.
Battery fully charged
- When the battery is fully charged, the charging light lights up green
continuously.
Note: After approx. 30 minutes, the charging light goes out to save energy.
Charging with the adapter (specific types only)
1 Put the small plug in the shaver.
2 Put the adapter in the wall socket.
, The charging light shows the charging status of the shaver (see
section ‘Charge indications’ in this chapter).
Charging in the charging stand (specific types only)
1 Put the small plug in the charging stand.
2 Put the adapter in the wall socket.
3 Place the shaver in the charging stand.
, The charging light shows the charging status of the shaver (see
section ‘Charge indications’ in this chapter).
Using the shaver
Note: You can also use the shaver directly from the mains. Simply connect the
shaver to the mains.
Shaving
1 Press the on/off button once to switch on the shaver.
ENGLISH6
To Next Page
Loading...
