EasyManua.ls Logo

Philips PT927 - Page 7

Philips PT927
230 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- .Children should be supervised to ensure that they do not play with
the shaver and the Jet Clean System.
- Always unplug the shaver before you clean it under the tap.
Caution
- Never immerse the shaver in water.
- Never immerse the Jet Clean System or the charging stand in water
nor rinse it under the tap.
- Do not use the shaver in the bath or in the shower.
- Never use water hotter than 80°C to rinse the shaver.
- Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
- The shaver, the Jet Clean System, the charging stand and the other
accessories are not dishwasher-proof.
- Water may leak from the socket at the bottom of the shaver when you
rinse it. This is normal and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
- Do not use the shaver, Jet Clean System, adapter, charging stand or any
other part if it is damaged, as this may cause injury. Always replace a
damaged adapter, charging stand or part with one of the original type.
- Use, charge and store the shaver and the Jet Clean System at a
temperature between 10°C and 35°C.
- Always place and use the shaver and the Jet Clean System on a surface
that is uid-resistant.
- Only use the adapter, charging stand and accessories supplied.
- Always put the protection cap on the shaver to prevent damage and to
avoid dirt accumulation in the shaving heads.
- Only use the Jet Clean System with the original Jet Clean solution
(HQ200).
- Always place the Jet Clean System on a stable, level and horizontal
surface to prevent leakage.
- When the Jet Clean System is ready for use, do not move it to prevent
leakage.
- The Jet Clean System thoroughly cleans but does not disinfect your
shaver, therefore do not share the shaver with others.
- Empty the cleaning chamber of the Jet Clean System and clean the
cleaning chamber thoroughly by rinsing it with hot tap water every
15 days.
- If the shaver and the Jet Clean System are subjected to a major
change in temperature, pressure or humidity, let them acclimatise for
30 minutes before you use them.
ENGLISH 7

Related product manuals