5 Clean the inside of the appliance with the
cleaning brush supplied (Fig. 13).
Note: The appliance does not need any lubrication.
Replacement
The cutting unit, the adapter and the hair
clipping comb are replaceable.
Replacing the cutting unit
Replace the cutting unit if it is damaged or worn.
Only replace the cutting unit with an original Philips
cutting unit.
1 Push the middle part of the cutting unit
upwards with your thumb until it opens and
then pull it off the appliance (Fig. 14).
2 Place the lug of the new cutting unit in the
slot and push the cutting unit onto the
appliance (‘click’) (Fig. 15).
Environment
Do not throw away the appliance with the
normal household waste at the end of its life,
but hand it in at an ofcial collection point for
-
ENGLISH
To Next Page
Loading...
