Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids such
as petrol, acetone or ethereal oils to clean the
appliance.
Note: The appliance does not need any lubrication.
1 Make sure the appliance is switched off and
disconnected from the mains.
2 Remove the comb from the appliance and
rinse the comb under the tap.
3 Push the centre top end of the cutting
element upwards with your thumb until it
opens (Fig. 15).
4 Clean the appliance under a warm running tap
to ush out the cut hair that has accumulated
under the cutting element (Fig. 16).
Replacement
If the adapter is damaged, always have it replaced
with one of the original type in order to avoid a
hazard.
ENGLISH
To Next Page
Loading...
