Philips QC5570 - Lubricate the cutting element

1
2
4 Place your thumb in the center of the round
side of the cutting element and your index
finger on the teeth of the cutting element. Use
your index finger to lift the cutting element from
the swivel head.
5 Rinse the cutting element under the tap or
clean it with the cleaning brush supplied.
6 Rinse the inside of the appliance under the tap
or clean it with the cleaning brush supplied.
1
2
7 Insert the lug of the cutting element into the
slot and push the cutting element back onto
the swivel head.
Lubricate the cutting element
Lubricate the cutting element every 3 months with
oil form the bottle supplied with the appliance.
1
2
1 Pull the front of the cutting element upwards
and remove the cutting element from the
appliance.
15
English