47
Step 2. Console frame assembly
• Install the two mounting brackets (3 & 4) with the six M8 x 12mm
screws (108). Refer to the important instructions on the following page
for this step.
• Mount the console frame (5) to the upright tubes (18 & 19) with six 3/8”
x 3/4” bolts (153), 3/8” split washers (58) and 3/8” at washers (59). Be
careful not to pinch the computer cables.
• Firmly tighten the six bolts (104) at the bottom of the uprights and
install the two end caps (32 & 33) with the four M5 x 12mm screws (73).
113 137 259
153
58
59
59
58
58
108
3
4
108
73
73
32
33
73
73
104
5
18
19
1
285
282
284
To Next Page
Loading...