50
Step 4. Parallel bar handrail assembly
• Install the eight 3/8” x 3/4” bolts (153) and 3/8” at washers (59) into
the holes on the underside of the frame. Only thread them into the
holes two or three turns so the slots in the handrail brackets can slide
onto the bolts easily. Slide the handrail onto the bolts and hand-
tighten them. Thread the eight 3/8” x 2” bolts (226) into the sides of
the handrails. Once all the bolts are installed tighten all of them
securely.
• Install the Lift Bars (192) to the parallel bars and secure with the knobs
(207).
• Install the rear step (181) by sliding into the receiving tubes under the
rear of the deck and secure with the two pins (217). Raising the rear
incline may make it easier to line up the holes for the pins.
137 259
1
181
192
207
207
226
59
153
59
226
153
217
217
192
207
207
226
226
59
153
153
59
To Next Page
Loading...