4 5
ENGLISH
1. Nebulizer tubing
2. Nebulizer mouthpiece
3. Nebulizer handset
4. Nebulizer holder
5. On/Off power switch
6. Compressor air openings
7. Air filter
8. Compressor air outlet
9. Air inlet for filter
Instructions for use
InnoSpire Essence
Important: Read these instructions carefully before using this device. If you have any questions
or problems with the product, please contact your healthcare provider or Philips Respironics
Customer Service at +00 1 724 387 4000.
General information
Intended use: This product is intended to provide a source of compressed air for medical
purposes. It is to be used with a pneumatic (jet) nebulizer to produce aerosol particles of
medication for respiratory therapy for both children and adults.
WARNINGS
1
Use the device for its intended purpose as described in this instruction manual as a
compressor nebulizer system for aerosol therapy. Follow your doctor’s instructions.
Any other use constitutes improper use and may be dangerous. The manufacturer cannot
be held liable for any damage caused by improper, incorrect or unreasonable use or if the
unit is connected to electrical installations not complying with safety regulations.
t is ecended t hae a acu deice e MD atte eated cess
respiratory delivery in case a situation arises when your nebulizer cannot be used (e.g. during
a power outage or if your compressor becomes inoperable for any reason).
the deice has een utside the eatin cnditins all t ce ac t nal
operating specifications before use.
n liuid silled n inside the unit shuld e alled t d ee eatin
2
Keep this manual for future reference.
3
Use the product in a clean environment; one that is free from dirt, dust, pet hair, etc.
4
Device should not be used around flammable substances, or in the presence of a flammable
anesthetic mixture with air, oxygen or nitrous oxide.
5
No modification of this equipment is allowed.
6
It is normal for the device to be warm to the touch when in use.
7
Do not stack the compressor with other equipment.
8
Electromagnetic information: Portable and RF communication devices such as cellular phones,
pagers, etc. can interrupt operation of electrical medical equipment. For this reason, your
compressor must be placed far enough away from these devices to prevent interference. This
device meets IEC60601-1-2 standard for electromagnetic compatability (EMC). EMC data
sheets are available from Philips Respironics customer service at +00 1 724 387 4000.
9
In case of failure and/or malfunction, read the “Troubleshooting” section. Do not open the
compressor housing as this is not a serviceable product.
10
The proper function of the device can be compromised if original replacement parts (e.g.,
filters) are not used.
11
Risk of electric shock do not remove back.
12
13
This device is for intermittent use 30 min on/30 min off. Failure to operate appropriately may
lead to device damage.
14
Do not use the device without the filter.
15
When using any electrical appliance, certain important safety measures must always be
followed, including the following:
se nl anuactuedsulied iinal accessies and cnents
ee suee the unit in ate as the deice is nt tected aainst ate enetatin
ee tuch the unit hen u hands ae et ist
D nt leae the unit utds
lace n a stale and hintal suace hen eatin
Mae sue the ai ent enins ae nt stucted
D nt all unsueised childen ini indiiduals t use the unit
D nt tun the unit sil ullin ut the lu the electical utlet
D nt use in a entilat cicuit
D nt use i the deice has cacs is daaed
16
Make sure that the electrical rating shown on the rating label on the bottom of the unit
corresponds to your main voltage and frequency before plugging in the device.
17
Do not use any adapter, simple or multiple, and/or extension cord.
18
Do not leave the unit plugged in when not in use. Unplug the device from the electrical outlet
when not in operation.
19
Follow the manufacturer’s instructions for installing the device.The manufacturer cannot be
held responsible for any damage caused by incorrect installation.
20
The power supply cord cannot be replaced by the user. In case the power supply cord
becomes damaged, contact Philips Respironics customer service for replacement (there is
no service option).