Philips Respironics V60 - Selecting the mask and exhalation port

Chapter 6
Operation
1047358 Rev N Respironics V60 Ventilator User Manual 6-13
Selecting the mask
and exhalation port
To be able to display full leakage data plus accurate tidal and minute volumes,
the ventilator must know the intentional leak characteristics of the specific
mask/patient interface and exhalation port.
After power-on, the Messages list displays the current mask and port settings
for 5 minutes.
Change these settings as follows:
1. Open the Menu window.
2. Select Mask/Port.
3. Select the desired mask/patient interface type (Table 6-1). Select
Accept to apply.
For information concerning mask/port leak characteristics, see the
instructions provided with each mask/port. See Appendix C for a list of
masks, circuits, and related components used with the ventilator.