Chapter 6
Operation
1047358 Rev N Respironics V60 Ventilator User Manual 6-19
2. Select the desired adjustment. As an example, the E-Cycle adjustment
is shown below.
3. The setting window opens. Adjust the setting, referring to the
pressure-time graphic which represents the effect on I-Time. Select
Accept to apply.
When Auto-Trak+ is active (when either Trigger or E-Cycle is set to a value other
than Normal), the ventilator setting window displays Auto-Trak+.
Additionally, after power-on the Messages list displays the Auto-Trak+ settings
for 5 minutes.
To Next Page
Loading...
