16
English
4
Remove and clean one shaving head at a time. Each
shaving head consists of a cutter and a guard.
Note: Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
5
Remove the cutter from the shaving guard and clean
both parts under the tap.
6
Put the cutter back into the guard.
7
Put the shaving heads back into the shaving unit.
8
Put the retaining frame back into the shaving unit (1)
and turn the lock clockwise (2).
To Next Page
Loading...
