English
6 Put the cutter back into the guard.
7 Put the shaving heads back into the shaving
unit.
8 Put the retaining frame back into the shaving
unit (1) and turn the lock clockwise (2).
9 Insert the hinge of the shaving unit into the slot
in the top of the shaver. Then close the shaving
unit.
Note: If the shaving unit does not close
smoothly, check if you have inserted the
shaving heads properly and if the retaining
frame is locked.
1
2
33
s3232_52_2sku_en_a6_cc2017_0820.indd 33 2019/08/20 16:48
To Next Page
Loading...
