Problem Possible cause Solution
The nose
trimmer
attachment does
not work.
The cutting element
of the attachment
is very dirty, for
instance because
some nasal mucus
has dried inside the
cutting element.
Clean the cutting element
by rinsing it under the tap
with hot water. Switch on
the appliance and rinse the
cutting element once more
to remove any remaining
hairs.
If rinsing the nose trimmer
under the tap does not
unblock the cutting element,
then immerse it in a glass
with warm water for a few
minutes. Then switch on the
appliance and rinse it under
the tap.
ENGLISH 35
To Next Page
Loading...
