Note: Make sure the projections of the shaving heads
t exactly into the recesses of the shaving head holder.
7 Place the retaining rings back onto the shaving
heads and turn them clockwise.
- Each retaining ring has two recesses and two
projections that t exactly in the projections and
recesses of the shaving head holder.
- Turn the retaining ring clockwise until your hear
‘click’ and the ring is xed.
Note: Hold the shaving head holder in your hand
when you reinsert the shaving heads and reattach the
retaining rings. Do not place the shaving head holder
on a surface when you do this, as this may cause
damage.
ENGLISH22
To Next Page
Loading...
