ENGLISH
C 2 Press the shaver head release button and
open the shaving unit.
C 3 Pull the shaving head holder off the
bottom part of the shaving unit.
C 4 Turn the retaining ring counterclockwise
(1) and lift it off the shaving head (2).
C 5 Remove one shaving head from the shaving
head holder. Remove the cutter from the
comb.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong comb, it
may take several weeks before optimal shaving
performance is restored.
C 6 Clean the cutter and comb under warm
tap water.
21
ENGLISH
C 1 For best results rinse the shaving unit by
running under hot water for a few minutes.
C
2 Press the Shaver Head Release Button to
open the shaving unit.
C
3 Rinse the shaving head holder under hot
tap water for 30 seconds.
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
4 Carefully shake off excess water and let
the shaving head holder air dry completely.
5 Close the shaving head holder. You will
hear a ‘click’.
Extra-thorough cleaning method
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn shaver OFF.
20
1
2
To Next Page
Loading...
