Philips S5400 - Trimmer Attachment Usage; Beard Styler Attachment Usage

2 Pull the attachment straight off the appliance.
Note: Do not twist the attachment while you
pull it off the appliance.
3 Insert the lug of the attachment into the slot in
the top of the appliance. Then press down the
attachment to attach it to the appliance (‘click’).
Using the trimmer attachment (specific
types only)
You can use the trimmer attachment to groom
your sideburns and moustache.
1 Make sure the appliance is switched off.
2 Remove the shaving unit from the appliance.
3 Insert the lug of the trimmer attachment into
the slot in the top of the appliance.
4 Switch on the appliance.
5 You can now start trimming.
6 Clean the attachment after use (see 'Cleaning
and maintenance').
Using the beard styler attachment (specific
types only)
1 Make sure the appliance is switched off.
2 Insert the lug of the beard styler attachment
into the slot in the top of the appliance. Then
press down the beard styler attachment to
attach it to the appliance (‘click’).
17
English