2 Press the release button to open the shaving
unit.
3 Pull the shaving head holder off the bottom
part of the shaving unit.
4 Turn the retaining rings anticlockwise and
remove them.
5 Remove the shaving heads from the shaving
head holder. Each shaving head consists of a
cutter and guard.
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally put a cutter in the wrong
shaving guard, it may take several weeks before
optimal shaving performance is restored.
6 Clean the cutter and guard under the tap.
21
English
To Next Page
Loading...
