English
22
- While you deactivate the travel lock, the
travel lock symbol lights up briey and the
shaver produces a short sound. The shaver
turns on and is now ready for use again.
Charging
Before rst use, charge the shaver for at least
2.5 hours without interruption and until the
battery charge indicator shows that the battery
is full. This is needed to make maximum use of
the battery capacity.
Subsequent charges take approx. 1 hour.
Note: You cannot use the appliance while it is
charging.
Charging with the power cord
1 Make sure the product is turned o.
2 Put the small plug in the shaver and connect
the power plug to any 100V to 240V AC
outlet. Use only the power cord provided.
The display of the shaver indicates that the
shaver is charging.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out of
the product.
Using the product
Always check the product and all
accessories before using. Do not use the
product or any accessory if it is damaged,
as this may cause injury. Always replace a
damaged part with one of the original type.
To Next Page
Loading...
